Latest button bit Tenders | Government button bit Tenders

Central Government/Public Sector

CTN :39885108

22 Apr, 2025 2.33 Lacs

East Singhbhum - Jharkhand

Tender For 01 nos borehole at rustomji patel cheshire home sundernagar - drilling of 05 inch dia bore hole , providing and fixing of 5 inch dia pvc casing pipe , supply of accessories 32mm ball valve alto , 32mm non return valve alto , 32mm m.s. clamp to hold pipe , g.i. nipple 32mm , g.i. bend 32mm , bore well cover of size 5 inch , pressure gauge , pvc tape 02 roll taplon tap 10roll mseal 20 pkt. etc. all component , installation charges of pump and above item in position charge , supply of gi pipe including gi union elbow socket reducer of pipe line make jindal or medium size 1 inch dia , size 3 by 4 inch dia , size half inch dia , valve size 3 by 4 inch dia , valve size half inch dia , providing and laying single layer brick flat soling with over brunt picked jhama bricks including preparing and leveling the bed and filling the joints with lcoally available coarse sand after dismantling old one , making platform withside brick wall one side 900 mm height and other three side 200mm for water filling are with anti skid vetrified floor tiles size 300 to 300 and ceramic wall tiles 300 to 150 mm upto a height of 900mm over brick wall for fixing stand point all complete no extra payment will be made for sidebrick wall and drain , providing and applying with synthetic enamel paint two or more coats with approved brand and shade ready mixed paint including primer as directed by manufacture with a monogrammed of ucil and date of repairing. , installation of two hp submersible auto run and stop dc ac pump motor waareodoo wp of stainless steel suitable for minimum one hundred and twenty fve to one hundred and fifteen mm borewell operating head sixty mete discharge rate minimum two thousand lph with lowering upto sixty meter thirty two mm dia upvc schedule eithty column pipe and twenty three point five sqm three core flat submersible cable including monil polucrystaliune pv array nine hundred mounted on suitable direction to optimize panel uses and withstand the wind pressure up to two hundred km ph and mainkg suitable arrangements to operate hand pump manually in the same bore when there is no soler power including five years warranty against defects in materials and workmanship with locking arrangements of switchboard all complete. , installation and fixing of push cock , supply and fitting of hot dip galvanized steel staging composit structure , hdpe water tank isi make 1000 ltrs. capacity with cover & locking arrangement.

State Government

CTN :39886559

07 Apr, 2025 90.31 Lacs

Noida - Uttar Pradesh

Tender For provide & fixing of road safety item on road between sector-62 and 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar

Private Sector

CTN :39839200

03 Apr, 2025 NA

Panchmahal - Gujarat

Tender For sale of steel scrap-heavy melting, boring drilling, iron hoop strip, sheeting. re-slitting steel, g.i scrap, steel drilling dust. non steel scrap - wooden batons, plastic bobbins white, garbage (misc. item), waste paper & corrugated paper, used cloth & hand gloves, used grinding disk. other scrap waste used flux, slag of multi plasma & laser m/c, plasma m/c bed scrap, welding wire, miscellaneous polycarbonate sheet

CTN :39809989

14 Apr, 2025 NA

Darjeeling - West Bengal

Tender For supply of extension rod r32 30 50mm (for rock drill machine dc 400) , button bit r32 51mm rt 300 (for rock drill machine dc 400)

CTN :39774574

12 Apr, 2025 21.65 Lacs

Chandigarh - Chandigarh

Tender For supply of drilling accesories - adopter for pneumatic grinder 3 by 4 inch , air hose clamp 20 mm dia with nut and bolt , air hose joint nipple 20 mm dia , air line lubricator make atlas copco model glg 10 , bracket for pusher leg jack hammer rh 656w for pusher leg , claw coupling with hose nipple 3 by 4 inch 20mm , claw coupling rubber washer 20 mm , pneumatic straight grinder make atlas copco model lsr48 so90 10 , grinding stone size 150x25x15mm , heavy duty pneumatic rubber air hose 20 mm for 10 point 2 kg cm 2 pressure conforming to is 911 1968 is 446 1980 , pneumatic jack hammer make atlas copco type rh 658 5l , lubricator coupling , pneumatic pusher leg make atlas copco model bmt 51 , rubber washer for lubricator , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex 22 mm shank hex comma 22 mm x 108 mm length 800 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex 22 mm shank hex 22 mm x 108 mm length 1200 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex. 22 mm shank hex 22 mm x 108 mm length 1600 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 chisel bit integral rod hex. 22 mm shank hex 22 mm x 108 mm length 3200 mm, bit dia 34 mm make atlas copco , r 32 button bit, 51 mm r32 make sandvik , coupling sleeve for extension rod r32 drill rod make sandvik , shank adopter for r32 drill rod make sandvik , coupling sleeve , male female coupling , adopter for air hose , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex 22 mm shank hex 22 mm x 108 mm length 600 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex. 22 mm shank hex 22 mm x 108 mm length 1800 mm bit dia 34 mm make atlas copco , tct drill rod 22 mm 7 by 8 inch chisel bit integral rod hex 22 mm shank hex 22 mm x 108 mm length 3600 mm bit dia 34 mm make atlas copco , y joint connector , extension rod r 32 comma 3050 mm long make sandvik

Central Government/Public Sector

CTN :39758528

30 Jun, 2025 NA

Duliajan - Assam

Tender For expression of interest for item- crome casing pipes , chrome tubing pipes , drill pipes , heavy weight drill pipe , drill collars and lifting plug , drilling stabilizers , drilling/ workover handling tools --- elevators, tongs, , slips etc. , potassium formate , solid control equipment --- mud cleaner/ degasser/ , centrifuge/ linear motion shale shaker , sucker rod pump (srp) and its accessories , srp insert pump , ethyl mercaptan , low shear velocity fluids/polymers , emd chemical dosing pump, reciprocating pump , hsp 20/40, isp 20/40, isp 30/50 mesh , pig tracker/transmitter , pipeline locator , logging cables , tri cone roller drilling bits of various sizes , 11"od standard reverse circulating junk basket & 7.7/8" od reverse circulating junk basket , pdc drill bits of various sizes , fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole , impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od casing , pneumatic spinner , 5.1/ 2" premium threaded casing (grade: n80 & grade p110) , cased hole logging units with tools and accessories along with installation, commissioning and training , wireline mast unit, including training and installation& commissioning , oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and hardware accessories , ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories , oil well explosives: explosives for baker pressure setting tools: power charge, primary ignitor & secondary ignitor , procurement of oil well explosives used in exploration and production of hydrocarbon , 27.1/2" (698.50 mm) rotary table , 7.1/16" x 10 m double ram bop with accessories , 13.5/8" x 10 m single ram bop with accessories , 3.1/16" x 10 m flexible steel hoses for choke manifold , 3.1/8" x 5 m flexible steel hoses for choke manifold , 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose , 3.1/8" x 5m flexible steel hoses , thermal wellheads for 7" and 9.5/8" casing completion with installation & commissioning , hose vibrator , rotary hose, drilling in assorted length , 2.34 mm (0.092") piano wireline (well measuring line) , static gel strength analyzer , electronic reservoir pressure and temperature measuring gauge. , automatic distillation apparatus , ft ir spectrophotometer , rheometer , 350 short ton drilling hook & elevator links (250 short ton, 350 short ton and 500 short ton) , digital acoustic liquid level measuring cum dynamometer equipment (echometer) , cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted length , geological thin section preparation unit comprising of cutting, vacuum impregnation, grinding and polishing equipment and consumables. , polarised microscope , pony drill collar , premium tubing , 37.1/2 rotary table , air gas permeameter , double block and bleed isolation plug , gas chromatograph , low to moderate temperature cement retarder , high temperature fluid loss control cement additive , xcd-polymer , xc-polymer (premium) , poly anionic cellulose-regular , poly anionic cellulose-super lo , junk sub 5.1/2 inch & 7 inch , 13.5/8-inch x 10000 psi annular bop , 13.5/8-inch x 10000 psi double ram bop. , ct reels , super fishing jar , drilling jar , overshots , slammer logging cables , 3 left hand kelly , multi element analyzer , high performance ep lube , mercury free pvt system , surface memory gauge , accessories of logging cable , downhole pressure temperature gauge , real time kinematic differential global positioning system , flow assurance software , seismic survey designing and modelling software , low to moderate temperature fluid loss control cement additive , high temperature cement retarder , cement friction reducer , isotope ratio mass spectrometer , fishing tool 6.75 od, axial vibrational, shock absorbing tool , 8 od, axial vibrational, shock absorbing tool , tubing stripper , nano-graphene based lubricant , tubing retrievab

Central Government/Public Sector

CTN :39770302

26 Mar, 2025 1.94 Lacs

Bhandara - Maharashtra

Tender For purchase of button bit for furukawa rock drill machine operating at dongri buzurg mine.

Central Government/Public Sector

CTN :39788162

28 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For supply and installation of heavy-duty sheet metal 4 mm thickness frame designed for housin g of en 15152, is 2553-1 & 2, uic 651, and uic 566/en 12663 compliant windshields for the aerodynamic c abs of modified wap-5 locomotives, as per clw specification no. clw/ms/3/027 alt6 and associated drawi ngs (1211-01.230-005, 1211-01.330-006, 1211-01.330-007, 1211-01.330-008, and 1211-01.330-009). 1) th e sheet metal frame conforming to is 2062 for mild steel or equivalent for heavy-duty structural application s, ensuring durability and impact resistance, appropriate sealing for the windshields using is 12459: 2003 o r equivalent standard windshield sealants that ensure high resistance to environmental stress and impact, 2) dimension equal to width of wap7 loco front face end to end windshield combined with support frame-2 nos/set, 3) m 8 size drilling hole for fixing clamps and fasteners of corrosion-resistant stainless steel or high -strength alloy, complying with is 1367 for fasteners and is 1570 for clamps, ensuring secure and vibration- resistant assembly as per frame requirement. note: all components shall meet the quality, strength, and sa fety standards confirming to uic 651/uic 566/en 12663 standards for locomotives. frame shall exactly mat ch to the dimensions of windshield keeping adequate tolerance factor. item required is for 2 cabs as 1 set. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39730396

28 Mar, 2025 NA

Kendujhar - Odisha

Tender For supply of button bit

State Government

CTN :39618458

28 Mar, 2025 NA

Bhopal - Madhya Pradesh

Tender For t.c. button bits and hammers - hammer 121 mm/125 mm mission 4 3/4, hammer 140 mm/142 mm drilling for 152 mm-mission-6, hammer 148 mm drilling for 165 mm-mission-6.5, hammer 155 mm drilling for 202 mm-mission-7, bits 121 mm/ 125 mm/ 138 mm-mission 4 3/4, bits- 6 -152 mm-mission-6, bits 6 1/2 -165 mm-mission-6, bits- 7 -175 mm-mission-6, bits 7 1/4 -185 mm-mission-6, bits 7 1/2 -190 mm-mission-6, bits 8 -202 mm-mission-6, bits over burden 7 -175 mm-mission 4 3/4, bits over burden 8 1/2 -215 mm-mission-6, bits over burden -9 -225 mm-mission-6, bits over burden -10 -250 mm-mission-6, bits over burden -11 -275 mm-mission-6, bits over burden -12 -300 mm-mission-6

Button Bit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors